SMC Networks SMC6750L2 User Manual

E NTERING C OMMANDS
3-7
command classes and associated modes are displayed in the following
table:
Exec Commands
When you open a new console session on switch with the user name
“guest,” the system enters Normal Exec command mode (or guest mode).
Only a limited number of the commands are available in this mode. You
can access all the commands only in Privileged Exec command mode (or
administrator mode). To access Privilege Exec mode, open a new console
session with the user name “admin,” or enter the enable command
(followed by the privileged level password if so configured). The command
prompt displays as “Console>” for Normal Exec mode and “Console#”
for Privileged Exec mode.
To enter Privileged Exec mode, enter the following commands and
passwords:
Class Mode
Exec Normal
Privileged
Configuration* Global
Interface
Line
VLAN
* You must be in Privileged Exec mode to access any of the configuration modes.
Username: admin
Password: [system login password]
CLI session with the SMC6750L2 is opened.
To end the CLI session, enter [Exit].
Console#

SMC Networks SMC6750L2 Specifications

General

Brand	SMC Networks
Model	SMC6750L2
Category	Switch
Language	English