C
OMMAND
L
INE
I
NTERFACE
3-38
RADIUS Client Commands
Remote Authentication Dial-in User Service (RADIUS) is a system that
uses a central server running RADIUS software to control access to
RADIUS-aware devices on the network. A RADIUS server contains a
database of multiple user name/password pairs with associated privilege
levels for each user or group that require management access to a switch
using the console port, Telnet or Web.
authentication login
Use this command to define the login authentication method and
precedence. Use the no form to restore the default.
Syntax
authentication login {radius | local | radius local | local
radius}
no authentication login
• radius - Use RADIUS server password only.
• local - Use local password only.
• radius local - Use RADIUS server password first and local
password next.
• local radius - Use local password first and RADIUS server
password next.
Command Function Mode Page
authentication login Defines logon authentication method
and precedence
GC 3-38
radius-server host Specifies the RADIUS server GC 3-39
radius-server port Sets the RADIUS server network port GC 3-40
radius-server key Sets the RADIUS encryption key GC 3-40
radius-server retransmit Sets the number of retries GC 3-41
radius-server timeout Sets the interval between sending
authentication requests
GC 3-42
show radius-server Shows the current RADIUS settings PE 3-42
To Next Page
Need help?
General
