SMC Networks SMC6750L2

RADIUS C LIENT C OMMANDS
3-41
Command Mode
Global Configuration
Example
radius-server retransmit
Use this command to set the number of retries. Use the no form to
restore the default.
Syntax
radius-server retransmit number_of_retries
no radius-server retransmit
number_of_retries - Number of times the switch will try to
authenticate logon access via the RADIUS server. (Range: 1 - 30)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#radius-server key green
Console(config)#
Console(config)#radius-server retransmit 5
Console(config)#