SMC Networks SMC6750L2

RADIUS C LIENT C OMMANDS
3-39
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
username - for setting the local user names and passwords
radius-server host
Use this command to specify the RADIUS server. Use the no form to
restore the default.
Syntax
radius-server host host_ip_address
no radius-server host
host_ip_address - IP address of server.
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#authentication login radius
Console(config)#
Console(config)#radius-server host 192.168.1.25
Console(config)#