SMC Networks SMC6750L2 User Manual

I NTERFACE C OMMANDS
3-67
Interface Commands
These commands are used to display or set communication parameters for
an Ethernet port, aggregated link, or VLAN.
Command Function Mode Page
interface Configures an interface type and enters interface
configuration mode
GC 3-68
description Adds a description to an interface configuration IC 3-68
speed-duplex Configures the speed and duplex operation of a
given interface when autonegotiation is disabled
IC 3-69
negotiation Enables autonegotiation of a given interface IC 3-70
capabilities Advertises the capabilities of a given interface
for use in autonegotiation
IC 3-71
flowcontrol Enables flow control on a given interface IC 3-72
shutdown Disables an interface IC 3-73
switchport
broadcast
Configures broadcast storm control IC 3-74
show interfaces
status
Displays status for the specified interface NE,
PE
3-75
show interfaces
counters
Displays statistics for the specified interface NE,
PE
3-76
show interfaces
switchport
Displays the administrative and operational
status of an interface
NE,
PE
3-77

SMC Networks SMC6750L2 Specifications

General

Brand	SMC Networks
Model	SMC6750L2
Category	Switch
Language	English