C
LASS
OF
S
ERVICE
C
ONFIGURATION
2-55
Web – Click Priority/Default Port Priority or Default Trunk Priority.
Modify the default priority for any interface, then click “Apply.”
CLI – This example assigns a default priority or 5 to port 3.
Mapping CoS Values to Egress Queues
This switch processes Class of Service (CoS) priority tagged traffic by
using four priority queues for each port, with service schedules based on
Weighted Round Robin (WRR). Up to eight separate traffic priorities are
defined in IEEE 802.1p. The default priority levels are assigned according
Console(config)#interface ethernet 1/3 3-68
Console(config-if)#switchport priority default 5 3-121
To Next Page
Loading...
Need help?
General
