SMC Networks SMC6750L2

C OMMAND L INE I NTERFACE
3-12
General Commands
enable
Use this command to activate Privileged Exec mode. In privileged mode,
additional commands are available, and certain commands display
additional information. See “Understanding Command Modes” on page
3-6.
Syntax
enable [level]
level - Privilege level to log into the device.
The device has two predefined privilege levels: 0: Normal Exec,
15: Privileged Exec. Enter level 15 to access Privileged Exec mode.
Default Setting
Level 15
Command Mode
Normal Exec
Command Function Mode Page
enable Activates privileged mode NE 3-12
disable Returns to normal mode from privileged mode PE 3-13
configure Activates global configuration mode PE 3-14
reload Restarts the system PE 3-16
end Returns to Privileged Exec mode GC, IC,
LC, VC
3-16
exit Returns to the previous configuration mode, or
exits the CLI
any 3-17
quit Exits a CLI session NE, PE 3-17
help Shows how to use help any NA
? Shows options for command completion
(context sensitive)
any NA