C
OMMAND
L
INE
I
NTERFACE
3-108
Related Commands
garp timer
bridge-ext gvrp
Use this command to enable GVRP. Use the no form to disable it.
Syntax
bridge-ext gvrp
no bridge-ext gvrp
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
GVRP defines a way for switches to exchange VLAN information in
order to register VLAN members on ports across the network. This
function should be enabled to permit automatic VLAN registration,
and to support VLANs which extend beyond the local switch.
Example
show bridge-ext
Use this command to show the configuration for bridge extension
commands.
Default Setting
None
Command Mode
Privileged Exec
Console(config)#bridge-ext gvrp
Console(config)#
To Next Page
Loading...
Need help?
General
