SMC Networks SMC6750L2

SNMP C OMMANDS
3-45
Example
Related Commands
snmp-server location
snmp-server location
Use this command to set the system location string. Use the no form to
remove the location string.
Syntax
snmp-server location text
no snmp-server location
text - String that describes the system location. (Maximum length:
255 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Related Commands
snmp-server contact
snmp-server host
Use this command to specify the recipient of a Simple Network
Management Protocol notification operation. Use the no form to remove
the specified host.
Console(config)#snmp-server contact Paul
Console(config)#
Console(config)#snmp-server location WC-19
Console(config)#