EasyManuals Logo

SMC Networks SMC6750L2 User Manual

Default Icon
272 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #183 background image
I
NTERFACE
C
OMMANDS
3-71
Example
The following example configures port 11 to use autonegotiation.
capabilities
Use this command to advertise the port capabilities of a given interface
during autonegotiation. Use the no form with parameters to remove an
advertised capability, or the no form without parameters to restore the
default values.
Syntax
capabilities {1000full | 100full | 100half | 10full | 10half |
flowcontrol | symmetric}
no port-capabilities [1000full | 100full | 100half | 10full |
10half | flowcontrol | symmetric]
• 1000full - Supports 1000 Mbps full-duplex operation
• 100full - Supports 100 Mbps full-duplex operation
• 100half - Supports 100 Mbps half-duplex operation
• 10full - Supports 10 Mbps full-duplex operation
• 10half - Supports 10 Mbps half-duplex operation
• flowcontrol - Supports flow control
• symmetric - Transmits and receives pause frames for flow control
(Gigabit ports only)
Default Setting
The default values for Fast Ethernet include 10half, 10full, 100half,
100full and flow control. The default values for Gigabit Ethernet
include all settings.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Console(config)#interface ethernet 1/11
Console(config-if)#negotiation
Console(config-if)#

Table of Contents

Other manuals for SMC Networks SMC6750L2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the SMC Networks SMC6750L2 and is the answer not in the manual?

SMC Networks SMC6750L2 Specifications

General IconGeneral
BrandSMC Networks
ModelSMC6750L2
CategorySwitch
LanguageEnglish

Related product manuals