To Next Page

To Previous Page

LASH

ILE

OMMANDS

3-19

Syntax

copy file {file | running-config | startup-config | tftp}

copy running-config {file | startup-config | tftp}

copy startup-config {file | running-config | tftp}

copy tftp {file | running-config | startup-config}

• file - Keyword that allows you to copy to/from a file.

• running-config - Keyword that allows you to copy to/from the

current running configuration.

• startup-config - The configuration used for system initialization.

• tftp - Keyword that allows you to copy to/from a TFTP server.

Default Setting

None

Command Mode

Privileged Exec

Command Usage

• The system prompts for data required to complete the copy command.

• The destination file name should not contain slashes (\ or /), the

leading letter of the file name should not be a period (.), and the length

of file name should be 1 to 31characters. (Valid characters: A-Z, a-z,

0-9, “.”, “-”, “_”)

• The number of user-defined configuration files is limited only by

available Flash memory space.

• You can use “Factory_Default_Config.cfg” as the source to copy from

the factory default configuration file, but you cannot use

“Factory_Default_Config.cfg” as the destination.

• To replace the startup configuration, you must use startup-config as the

destination.

• The Boot ROM image cannot be uploaded or downloaded from the

TFTP server. You must use a direct console connection and access the

download menu during a boot up to download the Boot ROM (or

diagnostic) image. See “Upgrading Firmware via the Serial Port” on

page A-2 for more details.

SMC Networks SMC6750L2 User Manual

Other manuals for SMC Networks SMC6750L2