SMC Networks SMC6750L2 User Manual

C OMMAND L INE I NTERFACE
3-124
Default Setting
This switch supports Class of Service by using four priority queues,
with Weighted Round Robin Queuing for each port. Eight separate
traffic classes are defined in IEEE 802.1p. The default priority levels
are assigned according to recommendations in the IEEE 802.1p
standard as shown in the following table.
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
CoS assigned at the ingress port is used to select a CoS priority at the
egress port.
Example
The following example shows how to map CoS values 0, 1 and 2 to CoS
priority queue 0, value 3 to CoS priority queue 1, values 4 and 5 to CoS
priority queue 2, and values 6 and 7 to CoS priority queue 3:
Queue
1234
Priority
0
1
2
3
4
5
6
7
Console(config)#interface ethernet 1/1
Console(config-if)#queue cos-map0012
Console(config-if)#queue cos-map 1 3
Console(config-if)#queue cos-map245
Console(config-if)#queue cos-map367
Console(config-if)#

SMC Networks SMC6750L2 Specifications

General

Brand	SMC Networks
Model	SMC6750L2
Category	Switch
Language	English