SMC Networks SMC6750L2 User Manual

C ONFIGURING THE S WITCH
2-6
Address Table
Static Addresses Displays entries for interface, address or VLAN 2-30
Dynamic Addresses Displays or edits static entries in the Address
Table
2-31
Address Aging Sets timeout for dynamically learned entries 2-32
Spanning Tree
STA Information Displays STA values used for the bridge 2-35
STA Configuration Configures global bridge settings for STA 2-37
STA Port Information Configures individual port settings for STA 2-37
STA Trunk
Information
Configures individual trunk settings for STA 2-37
STA Port
Configuration
Configures individual port settings for STA 2-37
STA Trunk
Configuration
Configures individual trunk settings for STA 2-37
VLAN
VLAN Basic
Information
Displays basic information on the VLAN type
supported by this switch
2-44
VLAN Current Table Shows the current port members of each VLAN
and whether or not the port supports VLAN
tagging
2-45
VLAN Static List Used to create or remove VLAN groups 2-47
VLAN Static Table Modifies the settings for an existing VLAN 2-48
VLAN Static
Membership by Port
Configures membership type for interfaces,
including tagged, untagged or forbidden
2-50
VLAN Port
Configuration
Specifies default PVID and VLAN attributes 2-51
VLAN Trunk
Configuration
Specifies default trunk VID and VLAN
attributes
2-51
Menu Description Page

SMC Networks SMC6750L2 Specifications

General

Brand	SMC Networks
Model	SMC6750L2
Category	Switch
Language	English