B
ASIC
C
ONFIGURATION
2-9
Web – Click System/System Information. Specify the system name,
location, and contact information for the system administrator, then click
Apply. (This page also includes
a Telnet button that allows you to access the
Command Line Interface via Telnet.)
CLI – Specify the hostname, location and contact information.
Console(config)#hostname SMC6750L2 Test Switch 3-25
Console(config)#snmp-server location TPS - 3rd Floor 3-45
Console(config)#snmp-server contact Chris 3-44
Console#show system 3-36
System description: SMC TigerSwitch - SMC6750L2
System OID string: 1.3.6.1.4.1.202.20.24
System information
System Up time: 0 days, 2 hours, 4 minutes, and 7.13 seconds
System Name : SMC6750L2 Test Switch
System Location : TPS - 3rd Floor
System Contact : Chris
MAC address : 00-30-f1-47-58-3a
Web server : enable
Web server port : 80
POST result :
UART Loopback Test......................PASS
Timer Test..............................PASS
DRAM Test ..............................PASS
I2C Initialization......................PASS
Runtime Image Check ....................PASS
PCI Device Check .......................PASS
Switch Driver Initialization............PASS
Switch Internal Loopback Test...........PASS
------------------- DONE --------------------
Console#
To Next Page
Loading...
Need help?
General
