SMC Networks SMC6750L2

P ORT C ONFIGURATION
2-25
Web – Click Port/Port Information or Trunk Information. Modify the
required interface settings, and click “Apply.”
CLI – This example shows the connection status for Port 13.
Console#show interfaces status ethernet 1/13 3-75
Information of Eth 1/13
Basic information:
Port type: 100tx
Mac address: 00-30-f1-47-58-46
Configuration:
Name:
Port admin: Up
Speed-duplex: Auto
Capabilities: 10half, 10full, 100half, 100full,
Broadcast storm: Enabled
Broadcast storm limit: 500 packets/second
Flow control: Disabled
Lacp: Disabled
Current status:
Link status: Down
Operation speed-duplex: 100full
Flow control type: None
Console#