Snell MV-32 - External Audio Source Properties

To Next Page

To Previous Page

MV-32/64 Multiviewer www.snellgroup.com Operation

4.15 External Audio Source Properties

Use this screen to set up audio reference levels and audio alarms associated with external

audio sources.

Fig 44. External Audio Source Properties

Digital Audio

Reference

Set the analog to digital reference level when applying an analog

meter scale to a digital source, or a digital meter scale to an analog

source. It can be set within the range of -30 to -3 dBfs.

Analogue Audio

Reference

Set the 0dB reference level with respect to analog meter scales. It

can be set within the range of -12dBu to +12dBu.

Note: The Digital and Analog reference level adjustments above have no effect when digital

audio is used with a digital scale.

Alarms section

Here the thresholds for Audio Loss, Audio Over and Antiphase

alarms can be set, along with the alarm enabling of individual

channels. The channels listed here relate to the external audio

sources.

Example:

Channels selected under Audio Loss will trigger an alarm when the

audio level on the associated channel falls below the threshold set

above.

Fig 45. External Audio Source Properties.