Snell MV-32 - Sources Tab

MV-32/64 Multiviewer www.snellgroup.com Operation
Issue 1 Rev 11 Page 42 © 2014 Snell Limited
4.11.3 Sources Tab
Fig 29. Module Menu - Sources Tab.
Source Name
Enables the naming of sources. These are not the names that get
transferred to UMDs they are simply user names to assist with
identifying sources from within the Web interface.
Table 19. Module Menu - Sources Tab.
Note:
Source names can be used to set the TSL Display Address when using the TSL protocol
for controlling UMDs and Tallies. See the TSL Protocol Options on page 48 for details.