MV-32/64 Multiviewer www.snellgroup.com Operation
Issue 1 Rev 11 Page 70 © 2014 Snell Limited
D-VITC/Ancillary
timecode:
Visible
Enables the display of the vertical interval timecode (D-VITC or ATC).
This is only available on SDI inputs.
1. D-VITC is only available on SD sources as there is currently no standard for HD
sources. Ancillary Timecode is available on both SD and HD sources.
2. The Timecode is displayed in a fixed position near the bottom center of the tile
within the video.
3. The display will start to be cropped when the tile is 150 pixels or less wide.
4. WST Teletext can only be decoded from Composite inputs.
5. Closed Caption pages of Teletext using the OP-47 standard can be displayed on
SDI inputs.
Table 39. Edit Object - Properties - VBI Tab.
To Next Page
Loading...