Sonatest Wave - Led Behaviours; The Device Is Turned off; The Device Is Booting

12 Wave User Manual
Version 4
NOTE: Disabling the touch screen can be useful for cleaning the screen.
IMPORTANT: To turn the unit off, you must use the on-screen power-
off button appearing at the bottom right of the Home screen. See
Section 4 for more details.
3.3 LED Behaviours
The LED light, next to the power button, provides information on Wave’s status.
3.3.1 The Device Is Turned off
• If Wave is not connected to the power supply, which means it is not charging, the
LED light is turned off.
• If Wave is connected to the power supply, which means the device is charging, the
LED will blink.
• If Wave is connected to the power supply and it is fully charged, a solid green LED
light is displayed.
3.3.2 The Device Is Booting
• During the booting phase, the LED will blink for 5 seconds until the Home screen
appears.