Sonatest Wave - Page 49

Wave User Manual 49
Version 4
The left columns include fields (Manufacturer, Frequency, Type, Angle, DGS Only,
Show Recent) to help you search for a probe. The table on the right shows the list of
available probes according to the fields chosen. In the probe list, it is possible to sort them
by clicking Model, Manufacturer, Frequency, Angle or Size.
Once a probe is loaded, it is possible to modify the Probe Model, the Angle, the Wedge
Velocity, the Probe Zero, the Frequency, the Probe Width and the Probe Type. Probe
Height will always remain greyed and X-Offset is only available for angular probes.
NOTE: DGS probes are identified with a small DGS logo next to the
manufacturer's name. DGS probes are the only probes that can be
used to make a DGS sizing method. Once a DGS probe is loaded all
the menu parameters are greyed out except Probe Model and Probe
Zero.
View the following video for instructions on how to choose a probe in
the Probe Selection.
View the following video how to choose a DGS probe.