III-133
For SYNC, select either INTERNAL SYNC, which controls the transmission
at intervals created in this system, or EXTERNAL SYNC, which controls the
transmission intervals by external signals.
When INTERNAL or EXTERNAL is selected, the present setting is shown on
the status bar (in the lower part of the screen.)
(The status bar display needs to be enabled.)
(5) INTERNAL TX CYCLE SETTING
This is for setting the multiple number of the transmission RANGE.
(6) EXTERNAL TRIGGER OUTPUT
For EXTERNAL TRIGGER OUTPUT, either SYNC OUTPUT or RANGE
END OUTPUT can be selected. The details are described in Section 4-3.
(7) RANGE END OUTPUT DELAY TIME
This can be changed only when the RANGE end output is selected for
EXTERNAL TRIGGER OUTPUT. The details of RANGE END OUTPUT
DELAY TIME are described in Section 4-3.
(8) DELAYED TRANSMISSION
The transmission timing of the transducer can be delayed. The details are
described in Section 4-2-3.
(9) SOUND SPEED
This is for setting the sound speed. By changing SOUND SPEED, the ES image
display and the data recording size can be changed.
The default setting is 1500m/s.
To Next Page
Loading...