STEP AS380 Series User Manual

Instruction Manual for AS380 Series Elevator Integrated Drive Controller
Chapter 5 Operator
93
4）create User folder under ―H:\para\‖，as the picture above，enter User folder，create new
document（100 at most）， document named：00.txt-99.txt。this folder is used to save download
parameter
Fig 5.11 create new document under H:\para\User
After connect handheld operator and main board and login in，Steps are as follows:
1) enter <intelligentize>menu，as the table below，enter parameter select menu：
Table 5.14 parameter select menu under intelligent debugging module
Step
Key
Display on operator
Remarks
-
——
auto Simplex
Door Locked
1 Floor 0.00m/s
=== 00000018 ===
Elevator status window
1
Eenter
Fun. Select
Para. Setup
→ Monitor
===============
Enter function selection window
2
Fun. select
reset
→ intelligentize
===============
Press and to select upper or lower item
3
Eenter
Intelligentize
Lvl.Micro Adj
→ Level Adj
Enter intelligentize

STEP AS380 Series Specifications

General

Brand	STEP
Model	AS380 Series
Category	Controller
Language	English