Steris V-PRO maX 2 - Page 116

10 — Appendix A
105
10085896_H
V-PRO
®
maX 2
Operator Manual
1
Main, Todd
From:
Brown, Renee
Sent:
Friday, October 14, 2011 3:07 PM
To:
Main, Todd; Eveland, Randal
Subject:
Chamber Pictures
Todd,

Iwouldusethefollowingpicturesinthegallery:

TrayPluspouchcare
2smalltrays1bigtray
2trays
Trayflextraypouch

Thesearethelabelednamesontheimages.

Thankyou,
Renée

From: MobileMe Gallery [mailto:noreply@mac.com]
Sent: Thursday, June 02, 2011 3:09 PM
Subject: View my album on MobileMe Gallery.
Steris Lores for Web Page
Sent to you by rpmimages@mac.com
Hello,
This is the lores web page i sent, you can download these lores
images, there is no retouching done we were waiting to see
which ones were needed.
Let me know if you need the hi res.
rpmimages@mac.com has shared a MobileMe Gallery album
with you. To check it out, click View Album.
If you have trouble accessing this page, please copy and paste the URL below into your browser.
http://gallery.me.com/rpmimages/102021
Figure 10-1. Correctly Loaded Low Temperature Sterilizer Chamber
Material Compatibility
Table 10-1. Materials Compatible With Sterilant
Plastics
*
Metals
*
Delrin
® 1
(polyoxymethylene, POM)
†
Aluminum
EVA (ethylene vinyl acetate)
Brass
KRATON
™ 2
Polymers (styrenic block copolymer,
SBC)
Cobalt Chrome Alloy
Neoprene (polychloroprene)
†
Copper
**
Noryl
® 3
(Polyphenylene ether and polystyrene)
Gold
Nylon
® 1
(polyamide)
†
Nitinol
PMMA (polymethyl methacrylate)
Platinum
PEEK (polyether ether ketone)
Silver
Polycarbonate, Polyethylene, Polypropylene,
Polystyrene, Polyurethane
Stainless Steel
PVC (polyvinyl chloride)
Titanium
Radel
® 4
(polyphenylsulfone)
†
Santoprene (thermoplastic vulcanizates, TPVs)