16 | Appendix STOBER
244
02/2019 | ID 442728.05
16.4.3 Installing software
You can find current versions of DriveControlSuite in our download center at
http://www.stoeber.de/de/download.
Information
If you use the expanded safety function via the SE6 safety module, you also need the
PASmotion integrated into DriveControlSuite. To this end, the PASmotion installation wizard
starts at the end of the DriveControlSuite installation process. You can either perform
installation of the component for the safety configuration or cancel it if you do not need it.
DriveControlSuite installation
ü
You must have administrator rights to perform the installation.
1. Save the setup file in any directory on your PC.
2. Exit all versions of DriveControlSuite if they have already been started.
3. Execute the setup file, and follow the installation instructions.
4. Optional: If you use the expanded safety function via the SE6 safety module, click Next and
follow the installation instructions after the PASmotion installation wizard has started.
5. Confirm the communication test.
ð If a firewall is active, you will receive a safety notice.
6. In this case, enable all associated checkboxes to permit communication in
DriveControlSuite in public and private networks.
7. Exit the installation and start DriveControlSuite.
16.4.4 Updates
In the Help menu of the DriveControlSuite commissioning software, you can search for a newer
version and, if available, download and install it.
Information
If the DriveControlSuite version is outdated, but the latest version is already installed on the
computer, the check will yield the result that no newer version is available.
To Next Page
Loading...
