3 | General safety instructions STOBER
14
05/2019 | ID 442790.01
3 General safety instructions
There are risks associated with the product described in this documentation that can be prevented by complying with the
described warning and safety instructions as well as the included technical rules and regulations.
3.1 Directives and standards
The following European directives and standards are relevant to the drive controllers:
§ Machinery Directive 2006/42/EC
§ Low Voltage Directive 2014/35/EU
§ EMC Directive 2014/30/EU
§ EN 61326-3-1:2008
§ EN 61800-3:2004 and A1:2012
§ EN 61800-5-1:2007
§ EN 61800-5-2:2007
§ EN 50178:1997
§ IEC 61784-3:2010
Subsequent references to the standards do not specify the respective year in order to improve readability.
3.2 Qualified personnel
In order to be able to perform the tasks described in this documentation, the persons instructed to perform them must
have the appropriate professional qualification and be able to assess the risks and residual hazards when handling the
products. For this reason, all work on the products as well as their operation and disposal may be performed only by
professionally qualified personnel.
Qualified personal are persons who have acquired authorization to perform these tasks either through training to become a
specialist and/or instruction by specialists.
Furthermore, valid regulations, legal requirements, applicable basic rules, this documentation and the safety instructions
included in it must be carefully read, understood and observed.
To Next Page
Loading...
Need help?
General
