1 | Foreword STOBER
8
05/2019 | ID 442790.01
1 Foreword
The compact stand-alone SC6 drive controller allows for sensorless control of STOBER LM series Lean motors. These motors
provide energy efficiency at the performance level of a synchronous servo motor. They also guarantee high investment
protection, thanks to energy efficiency class IE5 and the corresponding higher efficiency compared to IE4 asynchronous
motors. However, the SC6 can also be used in combination with asynchronous motors or synchronous servo motors with
encoders (e.g. the STOBER EZ series). The SC6 is available in three sizes with a nominal output current of up to 19A: sizes 0
and 1 as a double-axis controller, size 2 as a single-axis controller.
Features
§ Sensorless position control by STOBER Lean motors
§ Control of rotary synchronous servo motors, asynchronous motors and torque motors
§ HIPERFACE DSL One Cable Solution
§ Electronic motor nameplate via HIPERFACE DSL or EnDat 2.2 digital encoder interface
§ Integrated EtherCAT or PROFINET communication
§ STO safety technology using terminals or STO and SS1 using FSoE (Safety over EtherCAT): SIL3, PLe (cat.4)
§ Integrated brake control
§ Single-ended nominal power consumption on double-axis controllers for operation of motors with different power
§ Energy supply over DC link connection
To Next Page
Loading...
Need help?
General
