Stober SC6A062 User Manual

STOBER 15 | Appendix
05/2019 | ID 442790.01
197
15.4.3 Installing software
You can find current versions of DriveControlSuite in our download center at
http://www.stoeber.de/en/download.
Information
If you use the expanded safety function via the SE6 safety module, you also need the PASmotion component integrated into
DriveControlSuite. To this end, the PASmotion installation wizard starts at the end of the DriveControlSuite installation
process. You can either perform installation of the component for the safety configuration or cancel it if you do not need it.
Installing DriveControlSuite
ü You must have administrator rights to perform the installation.
1. Save the setup file in any directory on your PC.
2. Exit all versions of DriveControlSuite if they have already been started.
3. Run the setup file and follow the installation instructions.
4. Optional: If you use the expanded safety function via the SE6 safety module, click Next and follow the installation
instructions after the PASmotion installation wizard has started.
5. Confirm the communication test.
ð If a firewall is active, you will receive a safety instruction.
6. In this case, enable all associated checkboxes to permit communication in DriveControlSuite in public and private
networks.
7. Exit the installation and start DriveControlSuite.

Stober SC6A062 Specifications

General

Brand	Stober
Model	SC6A062
Category	Controller
Language	English