Strasbaugh Operator Functions
Version 1.2 - April 18, 1996 4 - 9
CONTROL PANEL
The machine control panel provides the necessary indicators,
displays and controls to allow the operator to monitor and
control critical machine functions. The basic features of the
control panel are explained below.
1) CRT display - used to display machine control and operating
information as instructed by the control program.
2) Keyboard - provides operator interface to machine control
computer for data entry and machine control.
3) Digital tachometers (3) - displays angular speed of motors in
R.P.M.
4) Potentiometers (6) - used to adjust motors to desired
operating speed.
5) Pressure gauges (2) - indicate air pressure (P.S.I.G.) and
vacuum (IN.HG.) present at respective inlets in back of
machine.
6) Keyswitch - used to control operating level of machine (auto,
manual, program).
7) Emergency Stop switch - safety switch to turn off all
electrical power and stop machine in event of an
emergency.
8) Audio alarm - beeper to notify operator of machine or cycle
error conditions.
To Next Page
Loading...