Sun Microsystems SPARCstation 5 Model 110 User Manual

System Board and Component Replacement 11-15
11
5. To eject the faulty DSIMM, press down on the ejection levers on both
sides of the DSIMM connector.
See Figure 11-15.
Figure 11-15 Ejecting a DSIMM
6. Holding the DSIMM by its edges, remove it from the slot and place it
on an antistatic surface.
11.3.2 Replacing a DSIMM
1. Carefully remove the new DSIMM from its protective packaging and
place it on an antistatic surface.
2. Choose any available slot and unlock (press down) the ejector levers
at both ends of the connector.
Push down ejector levers
to eject DSIMM.

Sun Microsystems SPARCstation 5 Model 110 Specifications

General

Brand	Sun Microsystems
Model	SPARCstation 5 Model 110
Category	Desktop
Language	English