5-1
CHAPTER
5
Safety and Tools Requirements
This chapter describes standards, safety procedures, and precautions you should
follow whenever you need to replace or remove assemblies or subassemblies from
your system.
■ “Safety Requirements” on page 1
■ “Symbols” on page 2
■ “System Precautions” on page 3
■ “Tools Required” on page 3
■ “Electrostatic Discharge (ESD) Precautions” on page 4
5.1 Safety Requirements
For your protection, observe the following safety requirements:
■ Follow all cautions, warnings, and instructions marked on the equipment.
■ Ensure that the voltage and frequency rating of the power outlet matches the
electrical rating labels on the system.
■ Use properly grounded power outlets.
To Next Page
Loading...
