D-2 SPARCstation 5 Model 110 Service Manual • November 1996
2. Return to the operating system environment.
If you are in a windowing environment, exit from it and wait for the operating
system prompt to appear. See the documentation supplied with your windowing
system.
3. Halt the operating system.
See the documentation supplied with your operating system for instructions on how
to halt it.
a. For Solaris 2.x (SunOS 5.x) systems, type:
b. For Solaris 1.x (SunOS 4.x) systems, type:
The operating system warns other users of your system of the impending
shutdown, and then halts itself after a one-minute delay. If you wish to provide a
longer delay, see the man page for shutdown(1).
The system synchronizes the file systems and brings you to either the > or ok
prompt.
If you see the ok prompt, skip ahead to Step 5; otherwise, continue with Step 4.
4. Enter
n at the > prompt to get to the ok prompt.
5. Enter
reset at the ok prompt.
6. When you see the system banner, press Stop-a to access the FORTH Monitor.
7. If you see the > prompt, enter
n to get to the ok prompt.
8. Enter
help diag at the ok prompt to get a list of tests that comprise the FORTH
Diagnostics.
9. Enter the name of the test that you wish to execute.
% su
Password: superuser password
# /usr/sbin/shutdown -y -g60 -i0
% su
Password: superuser password
# /usr/etc/shutdown -h +1
To Next Page
Loading...
