Index-4 SPARCstation 5 Service Manual—November 1996
system
abnormal response, 6-3
subassembly access, 7-1
system banner, 3-4
system board
damage prevention, 10-2
handling instructions, 10-2
layout, 10-3
power connector pinout, 4-4
removal/replacement, 11-18 to 11-22
replaceable components, 10-3
setting jumpers, 11-22
testing, 4-5
voltage checkpoints, 4-5
system cover
removal, 7-1
replacement, 7-5
system unit
external options, 1-6
interior components, 1-2
interior view, 1-3
internal options, 1-5
rear panel illustration, 1-4
T
test <alias name>, D-4
test <device path>, D-4
test cdrom, 2-9
test disk, 2-8
test disk0, 2-8
test disk1, 2-8
test disk2, 2-8
test disk3, 2-8
test floppy, 2-8
test keyboard,2-9
test net,2-8
test net-aui, 2-8
test net-tpe, 2-8
test screen, 2-8
test scsi, 2-8
test tape, 2-9
test tape0, 2-9
test tape1, 2-9
test ttya,2-9
test ttyb,2-9
test-all,2-9,D-4
test-memory, 2-9, D-8
testing the power supply, 4-4
testing the system board, 4-5
thick Ethernet, D-5
tip connection, 3-6
tip window, 3-7
tools required, 5-4
tpe-link-test? parameter, 2-8
troubleshooting, 2-1 to 2-11
turning off power, 6-1 to 6-4
turning on power, 6-4
twisted pair Ethernet, D-5
twisted-pair Ethernet
cable illustration, 12-3
connector pinout, B-5
U
use-nvramrc? parameter, 2-4
V
video cable, illustration, 12-3
video connector pinout, B-10
video output, none, 4-3
voltage checkpoints, 4-4
W
watch-aui, 2-9, D-5
watch-clock, 2-9, D-4
watch-net, 2-9, D-5
watch-net-all, 2-10, D-5
watch-tpe, 2-10, D-5
wrist strap, attaching, 7-4
To Next Page
Loading...
Need help?
General
