Figures ix
Figures
FIGURE 1-1 Basic SPARCstation 5 System 1-2
FIGURE 1-2 Interior View of SPARCstation 5 System 1-3
FIGURE 1-3 Rear View of SPARCstation 5 System 1-4
FIGURE 2-1 Factory-Defined Boot Sequence—POST Phase Settings and Tests 2-2
FIGURE 2-2 Factory-Defined Boot Sequence—OpenBoot PROM Phase Settings and Tests 2-3
FIGURE 3-1 Arrangement of Sun Type-5 Keyboard Diagnostic LEDs 3-2
FIGURE 3-2 Sun Type-4 Keyboard 3-2
FIGURE 3-3 Sun Compact 1 Keyboard 3-3
FIGURE 3-4 SPARCstation System Banner 3-4
FIGURE 3-5 Location of System Power LED 3-9
FIGURE 4-1 Power Supply Connector 4-4
FIGURE 4-2 DSIMM Slot Locations 4-8
FIGURE 7-1 Removing the Rear Panel Cover Screws 7-2
FIGURE 7-2 Removing the Cover 7-3
FIGURE 7-3 Grounding the Wrist Strap to the Power Supply 7-4
FIGURE 7-4 Replacing the Cover 7-5
FIGURE 7-5 Securing the System Unit Cover 7-6
FIGURE 8-1 Removing the Power Supply 8-3
FIGURE 8-2 Connecting the DC Power Harness to the Power Supply 8-4
To Next Page
Loading...
