x SPARCstation 5 Model 110 Service Manual • November 1996
FIGURE 8-3 Speaker/Power LED Cable Connections 8-6
FIGURE 8-4 Routing the LED Cable 8-7
FIGURE 8-5 Removing the Speaker Cover 8-9
FIGURE 8-6 Removing the Speaker 8-10
FIGURE 8-7 Speaker Connectors 8-11
FIGURE 8-8 Removing the SCSI Backplane 8-13
FIGURE 9-1 Drive Locations 9-2
FIGURE 9-2 Removing a Hard Disk Drive 9-3
FIGURE 9-3 Replacing a Hard Disk Drive 9-5
FIGURE 9-4 Removing the CD-ROM Drive 9-6
FIGURE 9-5 Jumper Settings for the CD-ROM Drive 9-7
FIGURE 9-6 Replacing the CD-ROM Drive 9-8
FIGURE 9-7 Diskette Drive Location 9-9
FIGURE 9-8 Removing the CD-ROM Filler Panel 9-10
FIGURE 9-9 Disengaging the Diskette Drive 9-11
FIGURE 9-10 Removing the Diskette Drive 9-12
FIGURE 9-11 Replacing the Diskette Drive 9-13
FIGURE 9-12 System Board Cable Connections 9-14
FIGURE 9-13 Rear Panel Captive Screws 9-15
FIGURE 9-14 Removing the System Board 9-15
FIGURE 9-15 Internal Cable Routing 9-17
FIGURE 9-16 Replacing the System Board 9-18
FIGURE 9-17 Backpanel Captive Screws 9-18
FIGURE 9-18 System Board Cable Connections 9-20
FIGURE 9-19 Rear Panel Captive Screws 9-20
FIGURE 9-20 Removing the System Board 9-21
FIGURE 9-21 Internal Cable Routing 9-22
FIGURE 9-22 Replacing the System Board 9-24
To Next Page
Loading...
