EasyManua.ls Logo

Sun Microsystems Sun Fire T2000 - Adding Components Inside the Chassis

Sun Microsystems Sun Fire T2000
166 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6-4 Sun Fire T2000 Server Service Manual July 2007
FIGURE 6-2 Adding a USB Device
6.2 Adding Components Inside the Chassis
You can add the following components to the server:
Memory
PCI-X cards
PCI-Express cards
6.2.1 Memory Guidelines
Use the following guidelines and FIGURE 6-3 and TABLE 6-1 to plan the memory
configuration of your server.
There are 16 slots that hold DDR2 memory DIMMs.
The server accepts the following DIMM sizes:
512 MB
1GB
2GB
4GB
The server supports two ranks of eight DIMMs each.
Front USB ports
Rear USB ports

Table of Contents

Related product manuals