Chapter 3 Server Diagnostics 3-47
Note – The components (asrkeys) vary from system to system, depending on how
many cores and memory are present. Use the showcomponent command to see the
asrkeys on a given system.
Note – A reset or powercycle is required after disabling or enabling a component. If
the status of a component is changed with power on, there is no effect to the system
until the next reset or power cycle.
3.7.1 Displaying System Components
The showcomponent command displays the system components (asrkeys) and
reports their status.
● At the sc> prompt, enter the showcomponent command.
Example with no disabled components:
sc> showcomponent
Keys:
MB/CMP0/P0 MB/CMP0/P1 MB/CMP0/P2 MB/CMP0/P3
MB/CMP0/P8 MB/CMP0/P9 MB/CMP0/P10 MB/CMP0/P11
MB/CMP0/P12 MB/CMP0/P13 MB/CMP0/P14 MB/CMP0/P15
MB/CMP0/P16 MB/CMP0/P17 MB/CMP0/P18 MB/CMP0/P19
MB/CMP0/P20 MB/CMP0/P21 MB/CMP0/P22 MB/CMP0/P23
MB/CMP0/P28 MB/CMP0/P29 MB/CMP0/P30 MB/CMP0/P31
MB/CMP0/CH0/R0/D0 MB/CMP0/CH0/R0/D1 MB/CMP0/CH0/R1/D0
MB/CMP0/CH0/R1/D1 MB/CMP0/CH1/R0/D0 MB/CMP0/CH1/R0/D1
MB/CMP0/CH1/R1/D0 MB/CMP0/CH1/R1/D1 MB/CMP0/CH2/R0/D0
MB/CMP0/CH2/R0/D1 MB/CMP0/CH2/R1/D0 MB/CMP0/CH2/R1/D1
MB/CMP0/CH3/R0/D0 MB/CMP0/CH3/R0/D1 MB/CMP0/CH3/R1/D0
MB/CMP0/CH3/R1/D1 IOBD/PCIEa IOBD/PCIEb PCIX1 PCIX0
PCIE2 PCIE1 PCIE0 TTYA
ASR state: clean
To Next Page
Loading...
Need help?
General
