1-1
CHAPTER
1
Safety Information
This chapter provides important safety information for servicing the server.
The following topics are covered:
■ Section 1.1, “Safety Information” on page 1-1
■ Section 1.2, “Safety Symbols” on page 1-1
■ Section 1.3, “Electrostatic Discharge Safety” on page 1-2
1.1 Safety Information
This section describes safety information you need to know prior to removing or
installing parts in the server.
For your protection, observe the following safety precautions when setting up your
equipment:
■ Follow all Sun standard cautions, warnings, and instructions marked on the
equipment and described in Important Safety Information for Sun Hardware Systems,
816-7190.
■ Ensure that the voltage and frequency of your power source match the voltage
and frequency inscribed on the equipment’s electrical rating label.
■ Follow the electrostatic discharge safety practices as described in Section 1.3,
“Electrostatic Discharge Safety” on page 1-2.
1.2 Safety Symbols
The following symbols might appear in this document. Note their meanings:
To Next Page
Loading...
Need help?
General
