EasyManuals Logo

Sun Microsystems Sun Fire T2000 User Manual

Sun Microsystems Sun Fire T2000
166 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
Chapter 3 Server Diagnostics 3-49
2. After receiving confirmation that the enablecomponent command is complete,
reset the server for so that the ASR command takes effect.
3.8 Exercising the System With SunVTS
Sometimes a server exhibits a problem that cannot be isolated definitively to a
particular hardware or software component. In such cases, it might be useful to run
a diagnostic tool that stresses the system by continuously running a comprehensive
battery of tests. Sun provides the SunVTS software for this purpose.
This chapter describes the tasks necessary to use SunVTS software to exercise your
server:
Section 3.8.1, “Checking Whether SunVTS Software Is Installed” on page 3-49
Section 3.8.2, “Exercising the System Using SunVTS Software” on page 3-50
3.8.1 Checking Whether SunVTS Software Is Installed
This procedure assumes that the Solaris OS is running on the server, and that you
have access to the Solaris command line.
1. Check for the presence of SunVTS packages using the pkginfo command.
The following table lists SunVTS packages:
If SunVTS software is installed, information about the packages is displayed.
sc> reset
% pkginfo -l SUNWvts SUNWvtsr SUNWvtsts SUNWvtsmn
Package Description
SUNWvts SunVTS framework
SUNWvtsr SunVTS framework (root)
SUNWvtsts SunVTS for tests
SUNWvtsmn SunVTS man pages

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sun Microsystems Sun Fire T2000 and is the answer not in the manual?

Sun Microsystems Sun Fire T2000 Specifications

General IconGeneral
BrandSun Microsystems
ModelSun Fire T2000
CategoryServer
LanguageEnglish

Related product manuals