2-58 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
â– After the XSCF reset, the XSCF session is disconnected. Please log in again to the
XSCF.
Specifying the Timeout Period of SSH/Telnet
â– Command operation
1. Use the showlogout(8) command to display the timeout period.
2. Use the setautologout(8) command to set the timeout period.
The set timeout period becomes effective at the next login.
Installing and Uninstalling an SSH User Public Key
â– Command operation
1. Use the showssh(8) command to display the user public key.
2. Generate the user private key and the user public key for a created XSCF user
account with your client software. See the manual for your client software for
procedures to create the user public key and to set the passphrase. We
recommend that the passphrase be set.
3. Use the setssh(8) command with option for installing user public key. Then,
copy and paste the user public key, which was made in Step 2, on the window
display. After pressing the Enter key, press the "Ctrl" and "D" keys to complete
the installation.
XSCF> showautologout
30min
<Example 1> Specify 255 (minutes) for the timeout period.
XSCF> setautologout -s 255
255min
<Example> The user key is not set.
XSCF> showssh -c pubkey
XSCF>
To Next Page
Loading...
Need help?
General
