Chapter 4 Operation of the Server 4-9
Commands Used to Display Domain Information
Execute the following commands individually, as appropriate. For details of
commands, see Chapter 5.
■ showdcl
■ showboards
■ showdomainstatus
■ version
4.2.1 Domain Information
■ Command operation
1. Use the showdcl(8) command to check the domain ID, LSB number,
configuration policy, No memory state (true/false), No IO state (true/false),
floating board state, and degradation information.
2. Use the showdomainstatus(8) command to check the domain status.
<Example 1> In the SPARC Enterprise M4000/M5000/M8000/M9000
servers
XSCF> showdcl -va
DID LSB XSB Status No-Mem No-IO Float Cfg-policy
00 Running FRU
00 00-0 False False False
01 -
02 -
03 -
04 01-0 False True False
05 -
:
15 -
<Example 2> In the M3000 servers
XSCF> showdcl -va
DID LSB XSB Status No-Mem No-IO Float Cfg-policy
00 Running FRU
00 00-0 False False False
To Next Page
Loading...
