3-4 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
TABLE 3-1 Types of Terminals Connected With XSCF
Port Terminal Type Port Number, Cable
XSCF-LAN port
(2 ports per XSCF
Unit)
[10/100 Mbps]
XSCF Shell ter minal
• You can use the XSCF Shell with SSH or telnet connection.
• Either of the two XSCF-LAN ports can be used concurrently by
more than one user. (Note 1)
• Switching to the domain console is enabled by the console(8)
command. For details on changing these default keys, see the
description on the console(8) command.
• After login, if the XSCF Shell is not used for a certain period,
the user is forcibly logged out. For details on setting XSCF
session timeout, see the description on the setautologout(8)
command.
• To return to the shell window from the domain console, press
the "#" (default escape character) and “.” (period) while holding
down the Enter key. For details on changing these default keys,
see the description on the console(8) command.
SSH: 22
telnet: 23
A LAN cable is
required.
Domain console (RW console) (Note 2)
• OS console enabled for input and output. The RW console is
enabled by specifying a write-enabled console in the
console(8) command from the shell terminal.
• In one domain, only one user (one connection) at a time can use
the RW console.
• When you return to XSCF Shell console without logging out
from the domain, the return causes automatically logging out
from the domain. For detailed instructions on setting the
session timeout value for domain console, see the Solaris OS
manual.
Domain console (RO console)
• OS console used for display only. The RO console is enabled by
specifying a reference-only console in the console(8)
command from the shell terminal.
XSCF Web
• The XSCF Web can be used by specifying a URL in a browser.
https: 443
A LAN cable is
required.
To Next Page
Loading...
Need help?
General
