2-1
CHAPTER
2
Setting Up XSCF
This chapter explains how to set up XSCF.
2.1 XSCF Setup Summary
Each XSCF function must be configured before it can be used. Make the following
settings:
■ User Account Administration (required)
■ Network Configuration (required)
■ Time Administration (required)
■ SSH/telnet Administration (optional)
■ Mail Administration (optional)
■ LDAP Administration (optional)
■ Https Administration (optional)
■ Log Archiving Administration (optional)
■ Audit Administration (optional)
■ SNMP Administration (optional)
■ Remote Maintenance Service Setting (optional) (see the following Note 1)
■ Domain Configuration (required) (see the following Note 2)
■ System Board Configuration (required) (see the following Note 3)
■ Domain Mode Configuration (optional)
■ Locale Administration (optional)
■ Altitude Administration (required)
■ DVD Drive/Tape Drive Unit Administration (optional)
To Next Page
Loading...
