Chapter 1 XSCF Overview 1-23
Note – Symbols: S: Supported. — : Not supported.
1.4.1 User Accounts and User Privileges
The system administrator and field engineers log in to XSCF with XSCF user
accounts that allow them to refer to the status of any part of the entire system and
work on all parts of the system. Each domain administrator uses an XSCF user
account that enables system control of one domain.
For the server, the system administrator must consider both a user account that
controls the whole system and a user account that administers each domain. When a
user is registered, the user is assigned a privilege that controls the XSCF operations
available to that user. This is referred to as the user privilege of the registered user
account.
For example, to set up a domain administrator, the user privilege for the domain is
specified. Moreover, you can provide system monitoring privileges, for instance,
without system operation privileges. You can also limit privileges to specific
domains.
TABLE 1-7 lists user privilege names and outlines the user privileges.
XSCF Web Provides the same functions as the functions of the XSCF Shells,
but provides graphical displays for easier operation.
_
S
Mail report Mail notification in the event of a failure enables prompt action
to be taken.
_S
SNMP trap
report
Enables consolidated control for system administration in
conjunction with SNMP manager.
_S
TABLE 1-6 XSCF Functions and Connection Ports (Continued)
Functions Contents Serial port
XSCF-LAN
Ethernet
To Next Page
Loading...
Need help?
General
