Chapter 2 Setting Up XSCF 2-43
3. Use the showldap(8) command to confirm that you have imported the
certificate chain.
Testing a Connection to an LDAP Server
â– Command operation
1. Use the setldap(8) command to perform the test.
2. Log in as the user created in the LDAP server. Confirm the registration using
the user’s password.
3. Use the showuser(8) command to confirm whether the displayed privilege is
the same as the one created in the LDAP server.
2.2.4 Time Administration
Time administration is used to specify the time and the NTP settings for this system.
The server (all domains) uses the XSCF Unit clock as the reference time.
Note – The customer should decide the NTP server operating mode. For details on
NTP, see the NTP manuals.
XSCF> showldap
Bind Name: cn=Directory Manager
Base Distinguished Name: ou=People,dc=users,dc=apl,dc=com,o=isp
LDAP Search Timeout: 60
Bind Password: Set
LDAP Servers: ldap://onibamboo:389 ldaps://company2.com:636
CERTS: Exists
XSCF> setldap -t sysadmin
onibamboo:389 PASSED
login: sysadmin
Password:xxxxxxxx
XSCF> showuser
User Name: sysadmin (nonlocal)
UID: 110
Privileges: platadm
To Next Page
Loading...
Need help?
General
