9-24 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
TABLE 9-20 lists the functions for configuring Log archiving for XSCF. Select
[Setting]-[Log Archives] in the Menu tree.
TABLE 9-21 lists the functions for configuring COD. Select [Setting]-[Capacity on
Demand] in the Menu tree.
Note – In the M3000 server, this function is not available.
TABLE 9-20 Log Archiving Configuration
Function Remarks
Log archiving display and configuration Displays and sets the archiving host to save the
XSCF log information, enabling and disabling log
archiving, and the log capacity limits.
These functions are equivalent to the
showlogarchiving(8) and setlogarchiving(8)
commands.
Host public key setting Sets a public key used in server authentication for
the archive host.
This functions is equivalent to the
setlogarchiving(8) command.
TABLE 9-21 COD Configuration (1 of 2)
Function Remarks
COD resource use status display and headroom
configuration
Displays the current use status of COD resources in
a resource, and displays and sets the headroom
quantity in the server.
These functions are equivalent to the
showcodusage(8), showcod(8), and setcod(8)
commands.
COD management information for each domain’s
display and setting
Displays the current use status of COD resources in
a domain, and displays COD license reservation
infomration and reserves a COD license to a
domain.
These functions are equivalent to the
showcodusage(8), showcod(8), and setcod(8)
commands.
To Next Page
Loading...
