5-2 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
â– auditop: The user can refer to the audit method of the XSCF and the audit
records.
â– auditadm: The user can control the audit to the XSCF.
â– fieldeng: The user can perform the commands for FEs.
TABLE 5-1 outlines the XSCF Shell commands. For details on each command and user
privileges, see the man page or the XSCF Reference Manual.
TABLE 5-1 XSCF Commands
Command Description
adduser Creates an XSCF user account.
deleteuser Deletes an XSCF user account.
disableuser Disables an XSCF user account
enableuser Enables an XSCF user account.
showuser Displays XSCF user account information. Alternatively, it displays the user's own
user account information.
password Changes an XSCF user account password. Alternatively, it changes the user's own
XSCF user account password.
setpasswordpolicy Configures the XSCF password policy.
showpasswordpolicy Displays the XSCF password policy.
setprivileges Assigns user privileges.
setloginlockout Configures the lockout of user accounts.
showloginlockout Displays the lockout setting of user accounts.
setnetwork Configures the XSCF network.
shownetwork Displays the XSCF network settings and XSCF-LAN network status.
setroute Configures the XSCF-LAN route.
showroute Displays XSCF-LAN route settings.
sethostname Specifies the XSCF-LAN host name and domain name.
showhostname Displays the XSCF-LAN host name and domain name.
setnameserver Sets a name server (DNS) with XSCF.
shownameserver Displays the XSCF name server(s).
applynetwork Applies the network settings.
setdscp Configures DSCP.
showdscp Displays the DSCP settings.
nslookup Checks for the name resolution of a host name.
To Next Page
Loading...
Need help?
General
