Sun Microsystems Sun SPARC Enterprise M4000 User Manual

3-1
CHAPTER
3
Connecting to the XSCF and the
Server
This chapter describes how to connect consoles and terminals to XSCF in order to
use the software, and how to connect to the server.
3.1 Connect Terminals to the XSCF
XSCF monitors and controls the server. You can use a terminal to interface with
XSCF by connecting to the LAN or serial port of the XSCF Unit. This section
describes the modes for connecting terminals and the methods of establishing a
connection to XSCF from a remote console. For the initial settings for connection to
XSCF, see Chapter 2.

Sun Microsystems Sun SPARC Enterprise M4000 Specifications

General

Brand	Sun Microsystems
Model	Sun SPARC Enterprise M4000
Category	Server
Language	English