9-20 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
Note – The login lockout function is not supported by XSCF Web. Set the function
by using setloginlockout(8) and showloginlockout(8) commands.
TABLE 9-15 lists the functions for configuring XSCF audit. Select [Settings]-[Audit] in
the Menu tree.
Your own account information display and
password change
Displays information of your own account without
the useradm privilege and changes the password.
These functions are equivalent to the showuser(8)
and password(8) commands.
Password policy display and setting Display the current system password policy. And
set the password policy that will be applied now.
These function are equivalent to the
showpasswordpolicy(8) and
setpasswordpolicy(8) commands.
Privileges for remote user account settings Change the privilege for a user account that is
defined in an LDAP repository.
This function is equivalent to the
setprivileges(8) command.
TABLE 9-15 Audit Configuration (1 of 2)
Function Remarks
Audit enabling and disabling Enable and disable the auditing.
This function is equivalent to the setaudit(8)
command.
TABLE 9-14 User Management Configuration (2 of 2)
Function Remarks
To Next Page
Loading...
Need help?
General
