9-28 SPARC Enterprise Mx000 Servers XSCF User’s Guide • August 2009
Component Information
To refer to the information and status of physical components in the server, select the
target component in the Physical tree. When you select a component, the component
information and the state are displayed in the main page. This information is
equivalent to the showhardconf(8) command.
To refer to the information and status of logical components that belong to each
domain, select the target component in the Logical tree. When you select a
component, the logical component information and the state are displayed in the
main page. This information is equivalent to the showboards(8) and
showhardconf(8) commands.
In addition, the state of each component on the Physical tree and the Logical tree can
be updated by pushing the REFRESH button of the XSCF Web Console. If there is a
component with an abnormal status, a mark is added to the component on the tree.
Select the component so marked, and confirm its details.
Note – Screen layouts and configurations may be changed to improve functionality.
9.5 XSCF Web Error Messages
TABLE 9-26 lists the typical messages category from the XSCF Web. Moreover, in each
category, detailed messages are displayed.
Also, the message from XSCF Web is almost the same as the error message of the
XSCF Shell command. For typical messages from the XSCF Shell command, see
Chapter 5.
Note – The error message depends on the XSCF Web item. Therefore, you will
occasionally see more messages.
TABLE 9-26 Error Messages of XSCF Web
Message Meaning
Authentication Failed Login failed.
XSCF ERROR XSCF abnormally ended.
To Next Page
Loading...
Need help?
General
