Chapter 9 How to Use the XSCF Web 9-25
TABLE 9-22 lists the functions for configuring Sun Management Center agent. Select
[Setting]-[Sun MC] in the Menu tree.
TABLE 9-23 lists the functions for configuring the authentication timeout period for
XSCF Web console. Select [Settings]-[Autologout] in the Menu tree.
Utility
The Pages of Utility include remote maintenance service, firmware update, XSCF
reset, and XSCF switch (M8000/M9000 servers only).
License information display, and license
addition/deletion
Displays COD license setting information, and
adds a license key to or deletes a license key from
the COD license database for XSCF.
These functions are equivalent to the
showcodlicense(8), addcodlicense(8), and
deletecodlicense(8) commands.
TABLE 9-22 Sun Management Center Agent Configuration
Function Remarks
Sun Management Center Agent Configuration Displays setup information and status of Sun
Management Center agent.
Start or stop the Sun Management Center agent
and make changes to its configuration.
These functions are equivalent to the
showsunmc(8) and setsunmc(8) commands.
TABLE 9-23 Auto Logout Configuration (XSCF Web)
Function Remarks
Timeout period display and configuration After logging in XSCF, if the system is not used for
a certain period, logout is automatically performed.
Displays and specifies the timeout period in
minutes.
The authentication timeout is 10 minutes by
default. The monitoring interval ranges from 1 to
255 minutes.
TABLE 9-21 COD Configuration (2 of 2)
Function Remarks
To Next Page
Loading...
Need help?
General
